Hard Drive Benchmark Results

Im curious as to see what you guys get for benchmark results with your hard drive. Download HD Tune , run it, and post back with your screen shot. This way we can see if having RAID 0 really makes much of a difference, if SATAII is much better then SATA, ect.



Heres mine:





That was done on a Seagate Hard Drive (320GB, 16MB Cache, SATAII (using SATA150 port though), 7200RPM, Perpendicular Recording)

Here's from my old Raptor 36G RAID. I'll make another later on with my current systems using this program.

As for the performace difference in SATA, IDE, etc... I don't think you'll see too much between interfaces. I beleive it'll all depend on the drives.

*edit*
And here's the HD benchmark for my Averatec's 4200RPM, 60G drive. I beleive it's just ATA133.

o boy here i come with my 150gb raptor.We will see what this big boy can do.

I dont know about hard drives tell if its fast?But as you notice the raptor 150gb gets very hot and i have a zalman thing for it to keep it cool.But 41C is not bad for harddrive is it?

Doesnt seem much higher then mine, as i said before, raptors are over rated

Hard drive mfg's say that hard drives shouldn't get above 40C for longest life.

but its faster. and you have a good harddrive too.The one you have its one of the best ones too.

Here's mine, have a huge spike due to disk access

That happens to me sometimes when someone messages me when im running the benchmark.



Is your drive SATA or SATAII?

Just standard SATA.

That's a bit slower than I was first expecting, but I guess it's about right if I got ~215Mbps with my RAID...

As for the temp, that does seem a little high. As you saw with my laptop, it was only running at 28*C(but it has been in the 40s and 50s if I recall correctly)