DVD burns slow

I know it's better to burn a back up movie slow but it take my system 45 min.

to burn at 8x using nero express 6. is there any thing I can do or is this normal.



CPU(s)

Number of CPUs 2 (1 Physical)



CPU#1 APIC ID = 0

Name Intel Pentium 4 630

Code Name Prescott

Specification Intel(R) Pentium(R) 4 CPU 3.00GHz

Family / Model / Stepping F 4 3

Extended Family / Model 0 0

Package LGA 775

Core Stepping N0

Technology 90 nm

Supported Instructions Sets MMX, SSE, SSE2, SSE3, EM64T

CPU Clock Speed 2992.6 MHz

Clock multiplier x 15.0

Front Side Bus Frequency 199.5 MHz

Bus Speed 798.0 MHz

L1 Data Cache 16 KBytes, 8-way set associative, 64 Bytes line size

L1 Trace Cache 12 Kuops, 8-way set associative

L2 Cache 2048 KBytes, 8-way set associative, 64 Bytes line size

L2 Speed 2992.6 MHz (Full)

L2 Location On Chip

L2 Data Prefetch Logic yes

L2 Bus Width 256 bits



CPU#2 APIC ID = 1

CPU Name Intel Pentium 4 630 (logical unit)





Mainboard and chipset

Motherboard manufacturer Dell Inc.

Motherboard model 0KF623,

BIOS vendor Dell Inc.

BIOS revision A02

BIOS release date 10/13/2005

Chipset Intel i945G/GZ rev. A2

Southbridge Intel 82801GB (ICH7) rev. 01

Sensor chip SMSC 7901



Memory

DRAM Type DDR2-SDRAM

DRAM Size 512 MBytes

DRAM Frequency 266.0 MHz

FSBRAM 3:4

CAS# Latency 4.0 clocks

RAS# to CAS# 4 clocks

RAS# Precharge 4 clocks

Cycle Time (TRAS) 11 clocks

# of memory modules 2

Module 0 Samsung DDR2 PC4300 - 256 MBytes

Module 1 Samsung DDR2 PC4300 - 256 MBytes



Software

Windows version Microsoft Windows XP Media Center Edition Professional Service Pack 2 (Build 2600)

DirectX version 9.0c

that's not normal, it should take around 15 minutes or so, I'd try different media and a different burning program and see if those help

Hope this helps you out:

http://club.cdfreaks.com/showthread.php?t=101616

use CD-R they are faster though. It can not be rw.

I've tried then both but it didn't solve the problem.

Are you burning cd's or dvd's? My computer takes 45minutes to burn a dvd I have not seen any computers do much better.



Never seen a computer that could do it in 15 minutes

I'm burning dvd's and that's about whwt it takes.

I'm burning dvd's and that's about what it takes.

Thats about normal on a fast computer, its not the burning part that takes so long its the encoding. I can actually burn it in about 5 minutes but it takes about 40 to encode it!