Home > Networking Help
Networking Help
Networking Help forum discussing issues such as routers, switches, small networks, file sharing etc. Find information for both wired and wireless networks.
Two routers, nothing works now
Alright, here's the thing: I had one router and one server on one computer. The server was localhost. Whenever I went on my IP, i could access it. I could also access it through http://localhost and http://192.168.0.125. Now, I have...
Alright, here's the thing: I had one router and one server on one computer. The server was localhost. Whenever I went on my IP, i could access it. I could also access it through http://localhost and http://192.168.0.125. Now, I have...
answer(2) view(992) status(
)
)
Invalid TFTP Operation Exiting Firmware Update
What is going on? Im here trying to assist in a software upgrade .. and as far as I know im not using any TFTP protocol in the software .. as far as I know anything fed to the printer is done in cleartext via STDOUT. It is plugged into ...
What is going on? Im here trying to assist in a software upgrade .. and as far as I know im not using any TFTP protocol in the software .. as far as I know anything fed to the printer is done in cleartext via STDOUT. It is plugged into ...
answer(7) view(904) status()
)
Airlink ASOHO4P-M (Port Forwarding Help.)
I recently purchased an Airlink 4-Port Router from Fry's. I have everything working perfectly, except one thing. I run a game server for Unreal, and I need to forward some ports to make the server appear visible on the server listing page i...
I recently purchased an Airlink 4-Port Router from Fry's. I have everything working perfectly, except one thing. I run a game server for Unreal, and I need to forward some ports to make the server appear visible on the server listing page i...
answer(4) view(982) status()
)
what is cpu utilization of router
cpu utilizationof router
cpu utilizationof router
answer(0) view(24) status()
)
10/100mbps vs. 10/100/100Mbps
I'm currently using a 10/100 interface card, wired to a Linksys Wireless Router "G" series router. My local internet connection icon near the clock says my speed is 100.0Mbps. Would I get faster speeds if I upgraded the router with a 10...
I'm currently using a 10/100 interface card, wired to a Linksys Wireless Router "G" series router. My local internet connection icon near the clock says my speed is 100.0Mbps. Would I get faster speeds if I upgraded the router with a 10...
answer(0) view(29) status()
)
IP networking problem
I setup wu-ftpd, telnet and ssh on my linux box (redhat 7.3) and i can login using both telnet and ftp using.... ftp open localhost but for some reason when i try to connect from a different computer, (for example.. one down the hall)....
I setup wu-ftpd, telnet and ssh on my linux box (redhat 7.3) and i can login using both telnet and ftp using.... ftp open localhost but for some reason when i try to connect from a different computer, (for example.. one down the hall)....
answer(1) view(448) status()
)
Debian Linux Networking
Hello everyone, I am looking for the easiest way to setup my debian system for an ethernet network at work. Thanks, skeasor
Hello everyone, I am looking for the easiest way to setup my debian system for an ethernet network at work. Thanks, skeasor
answer(9) view(441) status()
)
Networking problems
I'm totaly stuck. I have 2 PCs @ home. One running W2k with Internet connection and printer, the other running WinXP wanting to access printer and Internet. So, I did a conection sharing (the one which is build into W2k) and it works perf...
I'm totaly stuck. I have 2 PCs @ home. One running W2k with Internet connection and printer, the other running WinXP wanting to access printer and Internet. So, I did a conection sharing (the one which is build into W2k) and it works perf...
answer(2) view(221) status()
)
Networking Question
This Question is probably pretty easy for most of the bright people on this forum.. I am looking to network my 5 computers with a shared internet access from a router through DSL etc etc.. The DSL Phone Line is on one side of my house, ...
This Question is probably pretty easy for most of the bright people on this forum.. I am looking to network my 5 computers with a shared internet access from a router through DSL etc etc.. The DSL Phone Line is on one side of my house, ...
answer(19) view(667) status()
)
problems accessing network thru nic
I'm running 4.4 stable with 2 3c509c nics which i've manually configured to use the rj45 (cat 5?) connection, i've csvuped and went thru buildworld, etc. with no errors and i've been trying to get my network set up for over a week now and i...
I'm running 4.4 stable with 2 3c509c nics which i've manually configured to use the rj45 (cat 5?) connection, i've csvuped and went thru buildworld, etc. with no errors and i've been trying to get my network set up for over a week now and i...
answer(11) view(884) status()
)
Windows networking
Hi everyone, Can someone tell me why it is that when I go to 'network neighborhood' none of the computers on the network show up and I get an error box saying 'unable to browse network', but when I do a 'find' for each one, they show up,...
Hi everyone, Can someone tell me why it is that when I go to 'network neighborhood' none of the computers on the network show up and I get an error box saying 'unable to browse network', but when I do a 'find' for each one, they show up,...
answer(0) view(367) status()
)
networking
Any know where there is a tutorial a good one step by step for making redhat linux work as a router/gateway for windows 2000 clients, many thanks Biggie
Any know where there is a tutorial a good one step by step for making redhat linux work as a router/gateway for windows 2000 clients, many thanks Biggie
answer(2) view(838) status()
)
networking Windows 2k pro x2 with no luck
I justed added a windows 2k pro (clean install) machine to my 4 computer network via a linksysbefsr41. When I added this machine to the network, it booted the primary desktop off the network and I am no longer able to share with my prima...
I justed added a windows 2k pro (clean install) machine to my 4 computer network via a linksysbefsr41. When I added this machine to the network, it booted the primary desktop off the network and I am no longer able to share with my prima...
answer(2) view(513) status()
)
Networking Linux and Windows problem
Hi guys! I am not sure if this is the correct forum for this question, but I know someone here can help me because you are all SMARTIES! I am trying to network my linux redhat 8.0 web server to my WindowsME development computer. I ha...
Hi guys! I am not sure if this is the correct forum for this question, but I know someone here can help me because you are all SMARTIES! I am trying to network my linux redhat 8.0 web server to my WindowsME development computer. I ha...
answer(2) view(178) status()
)
firewire (1394) networking
I would like to network a windows computer and a linux computer together via firewire. Is this possible? Currently they are networked over ethernet with a hub/router in between. I transfer many large audio projects between these machines...
I would like to network a windows computer and a linux computer together via firewire. Is this possible? Currently they are networked over ethernet with a hub/router in between. I transfer many large audio projects between these machines...
answer(4) view(304) status()
)
Networking with Redhat 6.2
Hi all, I have a problem and don't know how to fix. It would be great if anyone could give me a hand. Here is my problem: I have installed a modem to my proxy server (called server 1) at work, I uesed to be able to connect my com...
Hi all, I have a problem and don't know how to fix. It would be great if anyone could give me a hand. Here is my problem: I have installed a modem to my proxy server (called server 1) at work, I uesed to be able to connect my com...
answer(0) view(576) status()
)
newbie networking
I just recently got a router so that my computers could share the same broadband. Can someone tell me how do I have one computer reading files from my other computer? On computer is on windows XP and the other is windows 98.
I just recently got a router so that my computers could share the same broadband. Can someone tell me how do I have one computer reading files from my other computer? On computer is on windows XP and the other is windows 98.
answer(3) view(748) status()
)
Yet another newbie, networking problem...
Hi, I'm a complete newbie - and still I've just installed Mandrake Linux 9.1... My problem is as follows... I have windows xp installed on a seperate partition on my hdd, and form windows my internet connection works perfectly fine... A...
Hi, I'm a complete newbie - and still I've just installed Mandrake Linux 9.1... My problem is as follows... I have windows xp installed on a seperate partition on my hdd, and form windows my internet connection works perfectly fine... A...
answer(5) view(888) status()
)
linux networking with windows
Hi, I hv a strange problem and am not sure if this is the right forum but hope somebody has a soln... I have set up a small LAN at home with just my laptop running windows98 (IP: 192.168.0.2) and my desktop running Mandrake 9.1 (IP: ...
Hi, I hv a strange problem and am not sure if this is the right forum but hope somebody has a soln... I have set up a small LAN at home with just my laptop running windows98 (IP: 192.168.0.2) and my desktop running Mandrake 9.1 (IP: ...
answer(1) view(769) status()
)
networking probs
Hi, I have the following hardware: Desktop with 3 GB Hdd with Mandrake 9.1 installed Laptop with win98 SE 1 ethernet hub I hv been trying to setup a small network between the 2 machines for sometime now.. I currently dont hv any ...
Hi, I have the following hardware: Desktop with 3 GB Hdd with Mandrake 9.1 installed Laptop with win98 SE 1 ethernet hub I hv been trying to setup a small network between the 2 machines for sometime now.. I currently dont hv any ...
answer(9) view(585) status()
)
networking problem
i have two machines networked through a router, one is running 2000 pro, and the other is running XP. i am able to see both computers on the workgroup from my 1000 machine, but can't access the XP machine. The XP machine is even worse off...
i have two machines networked through a router, one is running 2000 pro, and the other is running XP. i am able to see both computers on the workgroup from my 1000 machine, but can't access the XP machine. The XP machine is even worse off...
answer(0) view(198) status()
)
networking problem
I have two windows xp home edition machines( friggin hate windows, but I have to use it). Machine one has a dsl connection. Machine two connects (should) to the internet through maching one. I trying to share the connection between the two...
I have two windows xp home edition machines( friggin hate windows, but I have to use it). Machine one has a dsl connection. Machine two connects (should) to the internet through maching one. I trying to share the connection between the two...
answer(4) view(294) status()
)
Networking
I want to get RTP(real time transport protocol) packets from application layers and wants to send them over tcp an udp,for performance analysis.How can i do that.Is ther any emulator available that i can use.Or there is any other idea.
I want to get RTP(real time transport protocol) packets from application layers and wants to send them over tcp an udp,for performance analysis.How can i do that.Is ther any emulator available that i can use.Or there is any other idea.
answer(0) view(201) status()
)
Linksys Etherfast 5-Port Switch
... I have that device connected to my two computers. How can I access the harddrive of one computer from the other one? Keep in mind, I have a Linksys router somewhere else whose output is going into this one.. so I can't just do the 192.1...
... I have that device connected to my two computers. How can I access the harddrive of one computer from the other one? Keep in mind, I have a Linksys router somewhere else whose output is going into this one.. so I can't just do the 192.1...
answer(8) view(613) status()
)
Problem networking linux and win98se
I have configured samba and my linux machine shows up in my win98 network neighborhood but when i try to access it i get the message "the computer or sharename could not be found" ahhhh!!! please help. what are the possible probl...
I have configured samba and my linux machine shows up in my win98 network neighborhood but when i try to access it i get the message "the computer or sharename could not be found" ahhhh!!! please help. what are the possible probl...
answer(1) view(478) status()
)
networking linux to XP
i am very in experianced with networking so i need some help here. My PC runs XP but because we use linux and unix alot at uni i would like to have a set up where i can use linux red hat or something similar at home. i am very keen not to...
i am very in experianced with networking so i need some help here. My PC runs XP but because we use linux and unix alot at uni i would like to have a set up where i can use linux red hat or something similar at home. i am very keen not to...
answer(5) view(834) status()
)
Troubleshoot Networking
using a cable modem and the configuration is shown below: computer name : MPC Workgroup:XZEROX Computer description:XZEROX TCP IP : 192.162.1.55 subnet : 255.255.255.0 gateway: 192.168.1.254 DNS CONFIGURATION HOST: MPC ...
using a cable modem and the configuration is shown below: computer name : MPC Workgroup:XZEROX Computer description:XZEROX TCP IP : 192.162.1.55 subnet : 255.255.255.0 gateway: 192.168.1.254 DNS CONFIGURATION HOST: MPC ...
answer(2) view(748) status()
)
Windows XP to Linux Networking
Hi, I'm a Linux Newbie and have an odd problem with my home network. My setup is as follows: Windows XP pro box connected to cable modem via USB, which provides my internet access. Linux (Red Hat 9.0) box, Windows 2000 laptop, and XBox ...
Hi, I'm a Linux Newbie and have an odd problem with my home network. My setup is as follows: Windows XP pro box connected to cable modem via USB, which provides my internet access. Linux (Red Hat 9.0) box, Windows 2000 laptop, and XBox ...
answer(3) view(951) status()
)
Networking. (and assembly code)
Hello there! Could anybody suggest a dev platform I can use to study TCP IP protocols on a Linux machine? I tried the Snort logger with Hping2 to create and send packets but it's not working! The hpings are vanishing in the network fo...
Hello there! Could anybody suggest a dev platform I can use to study TCP IP protocols on a Linux machine? I tried the Snort logger with Hping2 to create and send packets but it's not working! The hpings are vanishing in the network fo...
answer(0) view(694) status()
)
Help with networking
Hi everyone, this is my first post. I am quite new to networking and i have a small problem. Im my home i have a network of three computers, they are all connected just using a small 5 port hub. We have broadband shared throughout ...
Hi everyone, this is my first post. I am quite new to networking and i have a small problem. Im my home i have a network of three computers, they are all connected just using a small 5 port hub. We have broadband shared throughout ...
answer(2) view(867) status()
)
Programming
- PHP Development
- Perl Programming
- C Programming
- Java Help
- Python Programming
- ASP Programming
- .Net Development
- Visual Basic Programming
- XML Programming
- WAP Programming
- HTML Programming
- JavaScript Development
- CSS Help
- Flash Help
- Photoshop Help
- Web Design Help
- Database Management
- MySQL Help
- MS SQL Development
- Oracle Development
- Mail Server Help
- Apache Development
- DNS
- IIS
- Networking Help
- FTP Help
Related Pages
- Vlan H H H
- Networking PC to MAC
- Long distance networking 50 miles apart
- transparent proxy?
- Huge Lagging Issue - DLINK
- Executing remote program/file.
- internet brower will not connect
- Destination host unreachable for wireless, but works for wired connection.
- Network jack not working
- Remote client for Netgear FVL328 VPN
- Opening ports 21 and 80 behind NAV/Router
- ARAP v BOOTP
- I am new to this forum, please help me
- Wireless Internet Problem
- Should I SSH to my router, or port forward?
- Remote Support s/ware
- A question about subnet.
- Automatically detect proxy server settings
- Network Help
- Networking Newbie simple question
Home -
About Infoqu -
Contact -
Privacy Statement -
Link to Infoqu -
Bookmark Infoqu
Copyright 2007-2010 by Infoqu. All rights reserved
Copyright 2007-2010 by Infoqu. All rights reserved